<VV> Dwell question

[Harry Yarnell]

I would suspect a bad dwellmeter, or one on the wrong scale before I'd blame
distributor wear.

Harry Yarnell
perryman garage and orphanage
perryman, MD
hyarnell1@earthlink.net

----- Original Message ----- 
From: "Sam & Marissa Andolino" <mandolin@rochester.rr.com>
To: "Virtualvairs" <virtualvairs@corvair.org>
Sent: Thursday, July 29, 2004 10:59 PM
Subject: <VV> Dwell question


> Hi everyone,
> I know someone with a 64 ,110 engine with 4 speed with a dwell question.
To
> get the dwell in the 30 thru 33 range the points have to be set at .009 or
> .010.  All the vacuum hoses have been replaced,  could a worn distributor
be
> the cause of the small point gap? The engine runs fine except there is a
> slight hesitation during shifting until the rpms are up. Any ideas would
be
> appreciated.
> Thanks in advance.
> Sam & Marissa Andolino
> mandolin@rochester.rr.com
> 1963 Red Monza Convertible
> 1966 Blue Corsa Turbo Coupe
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
the property
> of the writer, please attribute properly. For help,
mailto:vv-help@corvair.org
> This list sponsored by the Corvair Society of America,
http://www.corvair.org/
> Post messages to: VirtualVairs@corvair.org
> List info: http://www.vv.corvair.org/mailman/listinfo/virtualvairs
> _______________________________________________