<VV> VDO Gauges

[J R Read_HML]

Larry,

Which typically reads higher?  I would expect the Left head runs hotter.
How much diff do you see?

Attachments are scanned with anti-virus software.

Later, JR
'61 Rampside Standard 4/110
'65 Monza Convertible 4/140
'66 beater Coupe - icemobile 4/140

----- Original Message ----- 
From: "Larry Forman" <Larry@forman.net>

> 1. I mounted one VDO CHT gauge and a switch so I could select either the
> right or left CHT sending unit.  I mounted these in the stock location for
> cylinder head temp switch or thermister and connected the common sides
> together and selected with a single pole dual position switch either the
> right or left sending unit.  The 14 mm ring can be mounted easily with
some
> brass or copper washers using either bolts or the stock hardware.  That
way
> I could use up only one gauge position, but be able to read either one as
I
> wish.

> >Ned