<VV> Spare fan belt for an A/C car

[Bill Hubbell]

Oops:  Here is the link to the pictures:

http://community.webshots.com/album/209202132TbbOCX

(Sorry about that!)

Bill Hubbell


----- Original Message ----- 
From: "Bill Hubbell" <whubbell@cox.net>
To: <AirVair@yahoogroups.com>; "Virtual Vairs" <virtualvairs@corvair.org>
Sent: Monday, November 01, 2004 9:37 AM
Subject: <VV> Spare fan belt for an A/C car


> My so, Geoff, recently had a fan belt failure on his car, shortly after I 
> added Air Conditioning to it.  Of course, he now had the extra effort of 
> removing the compressor belt in order to install the replacement fan belt. 
> Afterwards, it occurred to me that there should be a way of installing and 
> storing the extra belt inside of the compressor belt, so in case of future 
> breakdowns it would not be necessary to remove the compressor belt.  It is 
> possible, and I have done so on his car.  the following site shows photos 
> of the storage of the belt -- this is for a 140 with Sanden Compressor, 
> using Rusty's mount -- storage will vary depending on your setup.
>
> Bill Hubbell _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help@corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs@corvair.org
> List info: http://www.vv.corvair.org/mailman/listinfo/virtualvairs 
> _______________________________________________