<VV> Need help from VV to make custom hubcentric rings

[Ron F Hinz]

With those dimensions, you'd have to press the ring and the wheel off and
after that, they'd never come off.
RonH

----- Original Message ----- 
From: "Rick Loving" <ral1963@earthlink.net>
To: <virtualvairs@corvair.org>
Sent: Friday, November 05, 2004 12:40 PM
Subject: <VV> Need help from VV to make custom hubcentric rings


> I have a set of Dan Gurney/ Hands look-a-likes  aftermarket 15x5.5 rims
> that I want to put on my Sprint.
> The problem is that the hub opening size of the aftermarket rims is
> 3.635" and the EM stock rim hub opening is 2.659"
> I would like to someone on the list make me a set of 4 hub-centric rings
> .25" thick with an outer diameter of 3.635 and an inner opening size of
> 2.659"
>
> I'm not talking charity, as I want to buy them, but need them as soon as
> possible.
>
> Is anyone out there available for a quick weekend project?  Steel, Alum,
> or other suitable material would be fine.
>
> Rick Loving
> Greensboro NC
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
the property
> of the writer, please attribute properly. For help,
mailto:vv-help@corvair.org
> This list sponsored by the Corvair Society of America,
http://www.corvair.org/
> Post messages to: VirtualVairs@corvair.org
> List info: http://www.vv.corvair.org/mailman/listinfo/virtualvairs
>  _______________________________________________