<VV> Question for the Gurus!

Jim Houston tampatexan@earthlink.net
Mon, 11 Oct 2004 19:05:30 -0400


Thanks to everyone for the replies!  I'll change the oil and filter 
tomorrow, verify oil pressure and let it run.... :-)

Jim Houston

David V. Clamp wrote:

>Snip--------------------------
>Today I got it fired up and it sounded like a thrashing machine!  I shut it
>off after about 15 
>seconds... I'm afraid to start it again because it sounds like it doesn't
>have any oil pressure (the dash lights work and went out when it started).
>I'm going to hook up a direct reading gauge tomorrow and verify pressure...
>my question is - assuming good oil pressure, how 
>long should it take for the lifters to pump up?  Should I change the oil and
>filter before proceeding? 
>Unsnip------------------------
>
>Jim,
>
>I'd change the oil and filter if it has sat that long. The lifters can take
>quite a while to quiet down. Sometimes they won't shut up until you take it
>for a leisurely cruise. Change the oil, then let it warm up a bit at idle.
>If it is running okay except for the lifter noise, take it for a test drive.
>Just don't drive it hard until the lifters settle down.
>
>David V Clamp 
>Member: Corsa 
>        Heart of Georgia Corvairs - Newsletter Editor, VP
>        Nader's Raiders 
>	  1966 Corsa convertible 140 +0.030/4spd 3.55 posi w/ AC 
>	  mailto:66corsa@cox.net