<VV> Replacement radio speaker options - late model

[J R Read_HML]

The vendors have the "nearly" correct speakers.

Attachments (if any) are scanned with anti-virus software.

Later, JR

----- Original Message ----- 
From: "Les" <corvair at mts.net>
To: <virtualvairs at corvair.org>; <corvairs at cybrus.net>
Sent: Saturday, April 30, 2005 1:02 PM
Subject: <VV> Replacement radio speaker options - late model


> Hi,
>
> Original speaker on my '65 (AM pushbutton) is dead. Plenty of 4 ohm 6x9s 
> available; original speaker was 10 ohm. Can I use a 4 ohm 6x9, or do I 
> need to rig a pair of 5" or so speakers in series to get close to 10 ohms? 
> How about a 6 ohm resistor in series with the 4 ohm speaker (I know that's 
> resistance and not impedance)?  I tried a 4 ohm speaker here and the 
> output transistor gets kinda warm...
>
> Les
> corvair at mts.net
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs 
> _______________________________________________