<VV> PowerGlide Question

[Shaun]

I don't know if it's a factor, but early '60s had a different cable than
late'60-'64.

yea, Vairily ... Shaun

----- Original Message ----- 
From: "Terry Kalp" <tkalp at cox.net>
To: <virtualvairs at corvair.org>
Sent: Sunday, August 28, 2005 8:06 PM
Subject: <VV> PowerGlide Question


I know there are some PowerGlide Wizards out there.   A friend was telling
about a problem he was having with the PG in his '60 Corvair.  In the 70's
the engine was replaced with a 164 cu in.  Ever since then the shift lever
will not go into the low position.  It will go into drive neutral and
reverse just fine.  While in drive it starts out in low and shifts up, it
will not downshift.   Any suggestions?

Terry Kalp
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property
of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
 _______________________________________________