<VV> Re: Quck Steering

[Mike Stillwell]

 Changing any factory component will NOT screw up the
Ackerman Angle. You can run factory box and no arms or
factory arms and no box, and the angle will remain the
same. It's when you change to any of the aftermarket
arms that the angle gets out of kilter at the
extremes. Remember that both factory boxes are
identical in their outward appearance and specs, the
quick one just works in the same range faster.

 Mike
 YS-117
 
--- Mike Kost <vairmike at sbcglobal.net> wrote:

> 
> 
> Andy Clark wrote:
> 
> >    Bob is correct. Changing only one component
> (box or arms) screws up the
> >Ackerman angle (toe-out on turns). You need the
> whole package to work
> >together to get the correct geometry.
> >
> >Andy Clark
> >
> NO! Changing the box only will NOT change the
> Ackerman angle. Only 
> changing the arms will do that.
> 
> Mike Kost



		
__________________________________________ 
Yahoo! DSL – Something to write home about. 
Just $16.99/mo. or less. 
dsl.yahoo.com