<VV> Late axle retaining bolt

[Sethracer at aol.com]

In a message dated 12/15/2005 7:04:06 AM Pacific Standard Time,  
chartzel at comcast.net writes:

I very  rarely disagree with our esteemed colleague Seth Emerson but the  bolt
holding the stub axle in is a 3/8-16 (9/16 head).  He is correct  in stating
the "french lock" or whatever that "thingie" is will prevent the  bolt from
coming loose, so you don't need to over torque it.
Clark  Hartzel



Sorry - I didn't have time to go pull one out! Use the torque values for  the 
3/8 coarse threads! -Seth