<VV> Power loss

[NicolCS at aol.com]

I'm thinking the hot ignition switch might just be dropping some voltage (as 
in DEFINITELY) and in combination with the normal ignition resistor voltage 
drop there just isn't enough coil output to spark the engine well.  You can test 
this theory by driving until the 'lil Rampy poops out and then "hot wiring" 
the coil to the battery and seeing if it starts.

Your ignition switch shouldn't be getting that hot.  Either the switch is 
defective, there's an abnormal load on the switch or you have  2000w amp running 
through the switch. ;-)
Craig Nicol