<VV> Re: thin brake washers

[Shaun]

I have a set without instructions or washers, but I've seen the instruction
sheet on e-bay. Unfortunately the sheet wasn't readable except to say there
were additional washers to be installed.
Shaun
----- Original Message ----- 
From: "Louis C. Armer, Jr." <carmerjr@mindspring.com>
To: <virtualvairs@corvair.org>
Sent: Saturday, February 05, 2005 3:11 PM
Subject: <VV> Re: thin brake washers


> Hey Shaun, No, I haven't installed metallics but I have installed
aftermarket
> shoes, Clarks shoes and NOS GM shoes. I thought you were talking about
> the thin washer so is it possible that there are extra washers in your
kit?
>
> Chuck Armer
> ////////////////////////////////////////
> At 02:10 PM 2/5/05 -0800, you wrote:
> >Hey Chuckster, have you installed metallics? Do you know if the washers
only
> >go under the tapered spring that already has a thin washer, or what? The
> >other spring sits in a "cup" so I'm a little confused. I've got a '64
> >accessory installation manual, but they're not there.
> >
> >yea, Vairily ... Shaun
> >
> >----- Original Message -----
> >From: "Louis C. Armer, Jr." Subject: <VV> Re:brake washers
> >
> >
> > > It allows the springs to slip and slide across the washers instead of
> >binding
> > > on the brake shoe's rough surface.
> > >
> > > Chuck Armer
> /////////////////////////////////////////////////
>
> Corvair Atlanta, BOD
> CORSA MEMBER
> CORSA Tri-Membership Chairman
> http://carmerjr.home.mindspring.com/
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
the property
> of the writer, please attribute properly. For help,
mailto:vv-help@corvair.org
> This list sponsored by the Corvair Society of America,
http://www.corvair.org/
> Post messages to: VirtualVairs@corvair.org
> List info: http://www.vv.corvair.org/mailman/listinfo/virtualvairs
>  _______________________________________________