<VV> Smitty's Distributor
Joe Robbins
robbins@monticello.net
Wed Feb 9 01:27:52 EST 2005
Now playing, World War Three. I'm outta here . <gg>
Joe Robbins
Assistant to the Boss and CIC of BBRT.
-----Original Message-----
From: virtualvairs-admin@corvair.org [mailto:virtualvairs-admin@corvair.org]
On Behalf Of BobHelt@aol.com
Sent: Tuesday, February 08, 2005 6:39 PM
To: vairologist@juno.com; virtualvairs@corvair.org
Subject: Re: <VV> Smitty's Distributor
In a message dated 2/8/05 2:42:22 PM US Mountain Standard Time,
vairologist@juno.com writes:
> I checked around but all I had was the long
> one-size-fits-all condensors on the shelf. I ended up bending the tang
> down that is on the points plate which is there to keep the condenser
> from being moved too close to the adjustable frame of the points. So
> finally after some careful positioning of parts and wire I got things so
> the movement of the points plate no longer rubbed on the shield when the
> vac adv actuated. I know a great many people don't bother with the dust
> shield and may never experience such a problem.
>
Hey Smitty,
A Pertronix Ignitor would have fixed that problem long ago. And they don't
even need a condenser! (GGGG)
Regards,
Bob Helt
_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property
of the writer, please attribute properly. For help,
mailto:vv-help@corvair.org
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
Post messages to: VirtualVairs@corvair.org
List info: http://www.vv.corvair.org/mailman/listinfo/virtualvairs
_______________________________________________
More information about the VirtualVairs
mailing list