<VV> Smitty's Distributor

BobHelt at aol.com BobHelt@aol.com
Wed Feb 9 00:39:15 EST 2005


In a message dated 2/8/05 2:42:22 PM US Mountain Standard Time, 
vairologist@juno.com writes:

> I checked around but all I had was the long
> one-size-fits-all condensors on the shelf.  I ended up bending the tang
> down that is on the points plate which is there to keep the condenser
> from being moved too close to the adjustable frame of the points.  So
> finally after some careful positioning of parts and wire I got things so
> the movement of the points plate no longer rubbed on the shield when the
> vac adv actuated.  I know a great many people don't bother with the dust
> shield and may never experience such a problem.
> 

Hey Smitty,
A Pertronix Ignitor would have fixed that problem long ago. And they don't 
even need a condenser! (GGGG)
Regards,
Bob Helt



More information about the VirtualVairs mailing list