<VV> Shimming of Heads

[JVHRoberts at aol.com]

It's better to shim up the bottom of the cylinders. Those gaskets aren't a 
high pressure and high temperature seal, and less prone to problems if you stack 
them. 


In a message dated 2/16/2005 8:54:02 AM Eastern Standard Time, bec176@msn.com 
writes:
Is it OK to use copper shims under the head gaskets to make up for material 
removed cleaning up the mating surfaces?

Jim Dallas
4 "63's"
1 "61"
MCCA
CORSA