<VV> Re: worn rocker balls
N2VZD@aol.com
N2VZD@aol.com
Tue, 4 Jan 2005 23:10:37 EST
i wonder if the balls wear when first run if you did not put assembly lube on
them or at least vaseline....i have taken high mileage engines apart that
have very useable rocker balls. i also look at rockers carefully for wear at the
tip where they contact the valves..if it has a worn area it will be noisey. i
use assembly lube by touco or make ky own with stp and trans fluid. it
should take quite a bit of it to assemble an engine if you use it everywhere you
should. well about 4-6 oz anyhow. regards, tim colson