<VV> Calibrate Fuel-Level Sender?

[J R Read_HML]

BTW - any EM owners reading this stuff, it is 0 to 30 ohms for you folks.

Attachments (if any) are scanned with anti-virus software.

Later, JR
----- Original Message ----- 
From: <UltraMonzaWest@aol.com>
To: <virtualvairs@skiblack.com>
Sent: Saturday, January 29, 2005 12:30 AM
Subject: Re: <VV> Calibrate Fuel-Level Sender?


> In a message dated 1/28/2005 10:06:32 PM Pacific Standard Time,
> hmlinc@sbcglobal.net writes:
>
>> Oh... "Bend to adjust" = Calibrate!
>>
>> Now I get it!
>>
> ***************************************************************************
> As long as you've got 0  and 90  ohms on the stops..bend away!
>
> Don't ask me how I got some oil level sight gauges to read
> correctly......ggggg
>
> Tank bottom to mounting boss  is 25"     "FULL"  =  19"      Gauge is only 
> 8"
> deep  with 4" arm/float giving empty to full.......ggggg
>
>
> Matt Nall / Patiomatt / WCUH / Chairman V V
> 69 Monza Cpe., 66 Monza vert, 65 Crown v8 Cpe.
> Somewhere between Reno, NV and Coos Bay, Or.
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help@corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs@corvair.org
> List info: http://www.vv.corvair.org/mailman/listinfo/virtualvairs
> _______________________________________________