<VV> Re: Floor Pans

[Garth Stapon]

Les:

Spot welding may be difficult considering that the tong access might be 
impaired.
----- Original Message ----- 
From: <corvair at mb.sympatico.ca>
To: <virtualvairs at corvair.org>
Sent: Thursday, June 02, 2005 10:02 AM
Subject: <VV> Re: Floor Pans


> I'm surprised no one has mentioned the spot welder option. Should be 
> easily rentable - a 2 handed electric spot welder has one electrode you 
> hold in each hand and is used from one side of the joint. Fit the panel 
> with some overlap, press down with the two electrodes anywhere on the 
> joint, hit the button, and three seconds later you have a pair of spot 
> welds. Repeat a couple hundred times and you have a secure welded joint. 
> Metal should be painted with weld through primer first and sealed later 
> with your choice of body sealant or paint.
>
> Les
>
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>