<VV> Good Corvairian Revisited / Linkage

[UltraMonzaWest at aol.com]

In a message dated 6/20/2005 5:18:02 PM Pacific Daylight Time, 
media_diva at sbcglobal.net writes:

> The thottle lever on the driver side sticks.  The rod that attaches the 
> lever to the accelerator arm needs a screw to hold it in place but when I put 
> one there it didn't move at all.   The front screw is there, the back is 
> missing.  I can't draw but here's the best I can do I hope it comes through.  
> Should the connector bar be pointed up so that the rod goes under the accelerator 
> arm or pointed down so the rod goes over the accelerator arm? When the rod is 
> not connected at all the lever doesn't stick.
> http://photos.yahoo.com/mzfrogprincezzz
> 
> Any ideas?
> 
******************************************************************************

I can't find a picture showing what you're describing...BUT   it is the same 
as your 65!

NO SCREW....the rod has threads on one end, with a swivel,  and the top is 
just bent at 90 deg.

BOTH  ends have CLIPS...not screws...

Go look at YOUR car...



Matt Nall / Patiomatt / WCUH / Chairman V V
69 Monza Cpe., 66 Monza vert, 65 Crown v8 Cpe.
Somewhere between Reno, NV and Coos Bay, Or.