<VV> Body Transplant

[Kent Sullivan]

Hey Bob,

I certainly hope the body of your car was not rougher than mine. Every
exterior panel of my car has been replaced except for the top half of the
right fender. Ironically, the floors were 100% solid.

--Kent
-----Original Message-----
From: virtualvairs-bounces at corvair.org
[mailto:virtualvairs-bounces at corvair.org] On Behalf Of Bob & Kathy Gilbert
Sent: Monday, June 27, 2005 5:20 PM
To: UltraMonzaWest at aol.com; virtualvairs at skiblack.com
Subject: RE: <VV> Body Transplant

Been there - done that exactly same as Kent but I suspect that I started
with a much rougher body.

Did it once, glad I did but never again!

Bob
1966 180 convertible 

-----Original Message-----
From: virtualvairs-bounces at corvair.org
[mailto:virtualvairs-bounces at corvair.org] On Behalf Of
UltraMonzaWest at aol.com
Sent: June 27, 2005 8:39 AM
To: virtualvairs at skiblack.com
Subject: Re: <VV> Body Transplant

In a message dated 6/27/2005 6:29:20 AM Pacific Daylight Time,
pottsf at msn.com
writes:

> Is there anyone on the list who has taken a Corvair body (no power 
> train, no brakes, no suspension, no interior) and "inhabited" it with 
> Corvair running gear to create a whole Corvair?
>    If so, please raise your hand and tell us what it cost, and what 
> you consider it to have been worth.
>    It sounds to me as though it could be more-difficult than repairing 
> SOME rust damage, even IF you have all the right parts to completely 
> outfit the new body right on hand (say, in the car whose body is being
replaced).
> 
> 
****************************************************************************
******

Assembling a Corvair?
Kent Sullivan is doing it right now.....for pics....    corvairkid.com

As far as ever finding / using a fully stripped body......very unlikely....

The average derelict, sunburnt body in the SW...needs rubber , upholstery
parts...and an engine / trans repair...



Matt Nall / Patiomatt / WCUH / Chairman V V
69 Monza Cpe., 66 Monza vert, 65 Crown v8 Cpe.
Somewhere between Reno, NV and Coos Bay, Or.
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org This list sponsored by the Corvair Society of
America, http://www.corvair.org/ Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
 _______________________________________________

 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org This list sponsored by the Corvair Society of
America, http://www.corvair.org/ Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
 _______________________________________________