<VV> Re: VirtualVairs Digest, Vol 10, Issue 5

[J R Read_HML]

Squeeze the round part of the jesus clip tight and place it on the tab with 
the holes lined up.  It should stay there.  Insert the adjuster shaft 
through the lined up holes and push the long end down onto the rod to hold 
it in place.  This is WAY easier to describe than to do!  You really can't 
see what you are doing and must "feel" everything into position.

Attachments (if any) are scanned with anti-virus software.

Later, JR

----- Original Message ----- 
From: "Padgett" <pp2 at 6007.us>
To: <virtualvairs at corvair.org>
Sent: Tuesday, November 01, 2005 8:00 PM
Subject: <VV> Re: VirtualVairs Digest, Vol 10, Issue 5


>
>>3  I remove rear grille..
>
> That was the part I was avoiding. Thought about it but decided to try some 
> other things.
>
> Padgett
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs 
> _______________________________________________