<VV> deflashing advice

UltraMonzaWest at aol.com UltraMonzaWest at aol.com
Mon Nov 7 14:46:22 EST 2005


In a message dated 11/7/2005 10:14:48 AM Pacific Standard Time, 
dreamwoodck at yahoo.com writes:

> Is the area between the top fin and the outside, solid portion of the head 
> supposed to be completely sealed all the way across? I've been unable to stab 
> through with a stiff drywall saw blade and it feels pretty solid.
> The same thing with one area, about half way across the head, between the 
> cylinders. There are openings of various sizes between the other fins but just 
> that one spot feels solid and won't break through with a little urging from 
> the saw or a drill bit, as does the other flash.
> You can bet that after going thorugh all this trouble, ALL the flash will be 
> off this head.
> 
> Chuck Kubin
> 
******************************************************************************

Post some pics!   just send the URL  so we can see...

Matt Nall / Patiomatt / WCUH / Mr. DeckRug
69 Monza Cpe., 66 Monza vert, 65 Crown v8 Cpe.
Somewhere between Reno, NV and Coos Bay, Or.


More information about the VirtualVairs mailing list