<VV> Dwell/Tachs
Frank F Parker
fparker at umich.edu
Mon Nov 28 18:24:58 EST 2005
>
> The next issue was more serious: when connected to the Corvair coil, the
> display went bananas, blinking just about all the characters that could blink
> and never staying anywhere long enough to read. Called Actron and found that
> was erratic. Finally constructed some new leads from shielded twisted pair
> with about 3" bare for the gator clips and that worked. Now have a stable
> display readable to +/- 10 rpm.
>
Had similar trouble when I was datalogging with some sensors. I had good
luck buying some ferrite cores ( shaped line donuts) and tightly winding
the signal cable thru it. Will attenuate the high freq interference. Can
buy some split ferrite cores also at Radio Shack.
Also had trouble at LeMans one year when the telemetry from the car
interfered with the TV signal the French TV guys were putting in for
in-car coverage. Solved that with copper foil tape with conductive
adhesive.
regards,
frank
More information about the VirtualVairs
mailing list