<VV> Link to Ken Hand's Cold Valve Adjustment Procedure

[Ron]

What's wrong with the Corvair two step sequence?
RonH

----- Original Message ----- 
From: "Padgett" <pp2 at 6007.us>
To: <virtualvairs at corvair.org>
Sent: Thursday, September 08, 2005 10:33 AM
Subject: <VV> Link to Ken Hand's Cold Valve Adjustment Procedure


>
>>Ken Hand's Valve Adjustment Procedure (cold, engine off):
>
> Just one note. If both valve covers are off, when both valves are tight 
> (in overlap) for one cyl, the opposing cyl is ready to adjust. The pairs 
> are 1-2, 3-4, and 5-6. I used this method to set V-8s cold. (actually if 
> either valve is tight, you can adjust but if you insist on being sure...)
>
> Padgett
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs 
> _______________________________________________
>