<VV> Corvair Belt Wrench

[J R Read_HML]

I'm with you on that one as it has not come up often (well NEVER) where I 
had to remove a carburetor by the roadside.

Later, JR

----- Original Message ----- 
From: "Ron" <ronh at owt.com>
To: <westerncanadacorsa at shaw.ca>; <VirtualVairs at corvair.org>
Sent: Friday, August 25, 2006 8:40 PM
Subject: Re: <VV> Corvair Belt Wrench


>I find that the 1/4" ratchet with a long extension is the best for those 
>lower carb nuts.
> RonH
>