<VV> Sound deadening

[Andy Clark]

Hi, Brian.
I have not used that particular kit, but I do use sound deadening material.
I've used Dynamat in the past, but more recently found Brown Bread (yup,
that's the name- made by B-Quiet). It's similar to Dynamat, but cheaper.
It's a
self-adhesive deadening compound bonded to an aluminum foil face. Cut it to
fit with scissors and press in place. (Well, for those of us in northern
climes doing this in the dead of winter....a heat gun helps it stick).
Brown bread is available from:
            http://www.b-quiet.com/ebay-brownbread.html
or call them at 877-727-8438

Last time I ordered (about 1 1/2 years ago) it came in a 70sq ft roll, with
an installation roller for $134.99 + $25 for shipping via UPS Ground (it's
heavy stuff). One roll did my LM sedan floor, front bulkhead, rear bulkhead
and 4 doors plus the rear bulkhead and 1/2 the floor in my LM Stinger Clone,
now in process. A 50 sq ft roll ($104.99 + $20 UPS) will probably do one
complete car interior (except for the roof).

More than worth the cost and effort in reducing interior sound. Plus the
doors now close with a satisfying "thunk".

HTH.
Andy Clark
Camano Island, WA.
66 140/4 Monza Sedan
66 140/4 Stinger Clone
66 180/4 Cord 8/10 #60
----- Original Message ----- 
From: "Brian" <bmoneill at juno.com>
To: <virtualvairs at corvair.org>
Sent: Thursday, January 05, 2006 9:47 AM
Subject: <VV> Sound deadening


Has anyone had any experience using the sound deadening kit shown at
http://www.quietride.com/product-catalog/default.htm

A little pricey!  Worth it?
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property
of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
 _______________________________________________