<VV> Radio Antenna

[J R Read_HML]

It comes out the top.  Turn the "nut" on top... loosen it till it starts up 
the shaft.  There is a swivel on the bottom end of the antenna which must be 
turned (swiveled) down in order to clear the hole.  Look at your replacement 
one - it should be set up this way.

Later, JR


----- Original Message ----- 
From: "Scott Candish" <scandish at sbcglobal.net>
To: <virtualvairs at corvair.org>
Sent: Saturday, July 15, 2006 9:35 PM
Subject: <VV> Radio Antenna


> OK....I'm buffaloed. How does one get to the right front fender mount 
> radio antenna?? Gotta replacement for the busted one but wherever I look, 
> I can't access the underside of the assembly. No access thru the trunk or 
> under the dash. I have the GM assembly manual but it's not clear as to how 
> to get to the antenna base. TIA,
>
>  Scott
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.394 / Virus Database: 268.10.1/389 - Release Date: 7/14/2006
>
>