<VV> Clutch trouble in Twinsburg

J R Read_HML hmlinc at sbcglobal.net
Sat Jul 22 22:12:39 EDT 2006

I've seen that happen on an EM as well.

Later, JR

----- Original Message ----- 
From: <NicolCS at aol.com>
To: <virtualvairs at corvair.org>
Sent: Saturday, July 22, 2006 7:40 PM
Subject: <VV> Clutch trouble in Twinsburg

> Hmm, how did the clutch suddenly go "that far" out of adjustment?  I've 
> had
> two experiences there.  One, I had a clutch fork that was "off the ball"
> suddenly go into correct positon and the clutch cable needed to be 
> re-adjusted.
> More recently, I had the pedal cross arm weld fail. (above the radio). 
> This
> failure was on a LM. Do you have an LM, or one of the pre-LM practice 
> models"? The
> welded joint between the arm and the cross shaft yielded a bit, which 
> relaxed
> the cable, Which I adjusted.  Then it yielded more and broke!  Take a 
> look.
> When I shared this on VV, I got a bunch of "me toos".
> Craig Nicol
> 65,66,67
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.394 / Virus Database: 268.10.3/395 - Release Date: 7/21/2006

More information about the VirtualVairs mailing list