<VV> Re: PLASTIC TUBING FOR OIL GAUGE

[Louis C. Armer,Jr.]

Why not just make a protective cover for the glass face???

Chuck Armer
////////////////////////////

At 08:30 AM 6/7/2006, you wrote:
>i got the longer tubing from air shock kits. monroe or napa shocks have a kit
>with tubing  and clips to hold it in place. i get a touch nervous having my
>oil pressure running that far. make sure of clearances and allow for 
>vibration
>. i used silicone rubber to hold it.  i do not have that car anymore. i run a
>test gauge on the oil filter for a few hours on new motors then remove it. i
>do know that if a belt breaks the gauge gets hit hard..broken glass all over
>the engine room. so plastic tubing should have some sort of gaurd around it
>there also.
>regards, tim colson
>///////////////////////////////////////////////////////

CORSA Member
CORSA Tri-membership Chairman
Corvair Atlanta Member
Corvair Atlanta BOD
Corvanatics Member
SECC Member

1965 Corsa Coupe
1964  Greenbrier
1966 Monza Convertible
1966 WTBRT #112 xcrosser 1/2 owner
http://carmerjr.home.mindspring.com/