<VV> Really Tired

[Sethracer at aol.com]

In a message dated 3/26/2006 1:04:31 PM Pacific Standard Time,  
JVHRoberts at aol.com writes:

Especially  since BMW wheels come in all sorts of sizes, and CHEAP  used! 
Seth sent 
us some  time ago the following info on someone who  can remachine BMW and 
other 
wheels  that are very close, for cheap,  something like $15 per wheel:



The only caveat I should add, about doing BMW wheels is to look  first for 
the correct back-spacing on the wheel. The Newer BMW wheels,  although using the 
same 5 on 120 bolt pattern, have a deeper backspacing. Those  might work on 
the last Camaros, But would sit in too far in for the Corvair.  Look for a 
"zero to 6mm offset" - AKA  about a 4"backspace, depending  on the wheel width! - 
Seth