<VV> Really Tired

[JVHRoberts at aol.com]

Yes, there's that too. Fortunately, proper spacers and longer studs are  
fairly cheap too. 
 
In a message dated 3/26/2006 7:21:41 P.M. Eastern Standard Time, Sethracer  
writes:

 
Especially  since BMW wheels come in all sorts of sizes, and  CHEAP used! 
Seth sent 
us some  time ago the following info on  someone who can remachine BMW and 
other 
wheels  that are very  close, for cheap, something like $15 per wheel:



The only caveat I should add, about doing BMW wheels is to look  first for 
the correct back-spacing on the wheel. The Newer BMW wheels,  although using the 
same 5 on 120 bolt pattern, have a deeper backspacing.  Those might work on 
the last Camaros, But would sit in too far in for the  Corvair. Look for a 
"zero to 6mm offset" - AKA  about a 4"backspace,  depending on the wheel width! - 
Seth