<VV> shop press

[Ron]

I have the 12 ton and have found it to be very useful.
RonH

----- Original Message ----- 
From: "DWard" <denniscward at earthlink.net>
To: <virtualvairs at corvair.org>
Sent: Monday, March 27, 2006 3:47 PM
Subject: <VV> shop press


>    I just spent $15 to have a machine shop press a pittman arm bushing in 
> place. That has motivated me to buy a shop press. My question is - what 
> capacity do I need for general purposes like bearings, bushings, and 
> whatever else. Northern Tool has a selection from $35 for a 1/2 ton to 
> $109 for a 12 ton. (and way beyond that).
>   Suggestions?
>   Thanks very much.
>
> Dennis.
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>