<VV> re:VV measuring coil volts

[kaczmarek at charter.net]

Guys,
Is the question with this coil input voltage, or is it the coils resistance (ohms) are out of spec? 

I would get the ohm-meter out and check the primary and secondary windings to see if the coil is operating properly. 
If there is an Autozone near you, they have the Wells Ignition charts which will tell you what to set your ohm-meter on, and how to check your primary and secondary windings for the coil you have, be it a Corvair style or one for a newer car, including Coil Paks. 

Hank
Needs to re-certify as ASE Parts Specialist so I can answer fully 


---- tom zimmermann <s10birdman1966 at yahoo.com> wrote: 
> hi, Tony..to measure the coil input voltage,hook your voltmeter up red to + sidewhere the yellow wire is,and black lead to grnd