<VV> Cold Draft and Kick Panels /ALERT

Western Canada CORSA westerncanadacorsa at shaw.ca
Fri Oct 27 14:55:38 EDT 2006


Likewise from here.  Rob Hall had a 69 that he picked up that virtually went
straight to the crusher.  Expandable foam had been used the quarters.  I
have never seen a car rust out in the middle of a fender or quarter panel
like that before.

Regards,
Joel

-----Original Message-----
From: virtualvairs-bounces at corvair.org
[mailto:virtualvairs-bounces at corvair.org] On Behalf Of Louis C. Armer,Jr.
Sent: Friday, October 27, 2006 11:49 AM
To: virtualvairs at corvair.org
Subject: Re: <VV> Cold Draft and Kick Panels /ALERT


Hey All, Smitty is usually one of my gurus about Corvairs BUT Ted 
Fahrenthold is
my very good friend and a very good paint and body man. Beware of any open
cell material you use anywhere in a Corvair ...........Especially in a 
Corvair as they are unit
body and rust in certain areas means Death for the vehicle. Ted has 
had vehicles in which
expandable foam was used in an inside of the vehicle application and 
the results were
horrendous.

Chuck Armer
////////////////////////////////////////
At 12:42 PM 10/27/2006, you wrote:
>Smitty says:  Having no experience with Lates in the kick panel area
>I don't know of the feasability of this.  I have sealed plenty of 
>Earlies and have about made up my mind to try it the next 
>time.  That is to use some of that expandable foam in a spray can 
>that is used to caulk around house windows.With the earlies 
>considerable time can be consumed getting the plastic duct assembly 
>wiggled through the opening and most of those have become distorted 
>from over tightning to squash what ever sealer is used.  Seems to me 
>that putting the duct in place and then squirting foam around the 
>edges with the applicator straw before snugging it up would provide 
>a good seal.  The stuff expands like crazy for some time after being 
>released.  How would this work with a Late?  The foam is not very 
>tough and it seems to me it would not create a problem tearing it 
>loose when removal is desired.
>///////////////////////////////////////////////////

CORSA Member
CORSA Tri-membership Chairman
Corvair Atlanta Member
Corvair Atlanta BOD
Corvanatics Member
SECC Member

1965 Corsa Coupe
1964  Greenbrier
1966 Monza Convertible
1966 WTBRT #112 xcrosser 1/2 owner http://carmerjr.home.mindspring.com/  
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org This list sponsored by the Corvair Society of
America, http://www.corvair.org/ Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________



More information about the VirtualVairs mailing list