<VV> ignition/carb advise needed

[TimogensTurbo at aol.com]

In a message dated 9/9/2006 1:59:30 PM Pacific Daylight Time, 
devin at valleyautomotivesupply.com writes:

> Removed, cleaned and inspected the points.  They were pitted some, filed 
> them and re-installed.  Now when I set the points to .016 gap, factory spec, 
> used, I have 45-48 degrees of dwell, instead of 31-34 degrees it calls for.
==============================================================================
======

There's your problem, I'll wager.....

Forget the pointgap measurement.....just adjust until you get  28-32 deg. of 
dwell...then try it out and report back!

Welcome to VV!   

Matt Nall
stocker, mod, v8, turbo, boat, Sandcar
ALLVAIR!
Timogen was a softy!