<VV> gas tank fill hose

J R Read_HML hmlinc at sbcglobal.net
Sat Aug 11 01:33:56 EDT 2007


Buy it and the other hose from a VV vender.  ALSO get the hard (preformed I 
think) line to the RF brake cylinder since this is the perfect time to take 
care of it.  BTW... you will need to drop the tank in order to make all of 
this happen.  If it is full at this time, drain by conventional methods - 
NOT by vacuum cleaner.

Later, JR
CCE and CORSA member
'61 Rampside Standard 4/110
'65 Monza Convertible 4/140
'66 beater 500 Coupe "icemobile" 4/140 (50%)
ALL with clean tanks and good RF hard lines.

----- Original Message ----- 
From: "Frank Maloof" <corvette at velocity.net>
To: "ask a corvair owner" <virtualvairs at corvair.org>
Sent: Friday, August 10, 2007 7:00 PM
Subject: <VV> gas tank fill hose


can any one tell me the size hose it takes for the filler hose on the gas 
tank, on my 65 corvair, ID ? and how long it has to be , is it some thing i 
can get at a NAPA store , Thanks Frank 65 Corvair Monza Cp.
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are 
the property
of the writer, please attribute properly. For help, 
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, 
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
 _______________________________________________ 



More information about the VirtualVairs mailing list