<VV> valves/clicking

Harry Yarnell hyarnell1 at earthlink.net
Tue Aug 28 20:20:36 EDT 2007


You turn it 120°. Use the firing order stamped on the engine top cover. OR, 
rotate it one tower (Plug wire, 60°) of the distributor.

harry yarnell
perryman garage and orphanage
hyarnell1 at earthlink.net
----- Original Message ----- 
From: "Jonathan Lawler" <computerwhiz31 at gmail.com>
To: <virtualvairs at corvair.org>
Sent: Tuesday, August 28, 2007 8:02 PM
Subject: <VV> valves/clicking


> well, anyone who's heard of me knows i've had infinite trouble with my
> valves. i must've had the rockers off 10 times. anyway, my car's been
> clicking lately, and it seems to be pretty regular. however, sometimes 
> when
> i take it a mile or two, it gets loud to the point of blaring. i've always
> thought it to be a lifter, and had new ones i was gonna put in, however 
> when
> i took off the valve covers, the rockers were incredibly loose. so i
> figgered i'd set the valves the the nth time and see if maybe the clicking
> was loose rockers. so i started, but after i set the first one at tdc, and
> when i moved to the next piston, the rockers were loose. i'm totally lost. 
> i
> have no idea what's going on, and i figgered maybe one of you gentlemen 
> had
> some suggestions.
> P.S. how many degrees do i turn the crank pulley to get the the next 
> piston.
> i turned it 365, and was off.
>
> -- 
> -jon
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________ 



More information about the VirtualVairs mailing list