<VV> Flywheel bolts

[BBRT]

Or you could go to Clarks Corvair online catalog or Corvair Underground  (in 
OR) to get a set... for just under $6 ea. Clark's #C787.  Or join the local 
club and someone will have some.. And there are VERY active folks in your 
Homeport area (Everett, WA?) in the NW.

Chuck S
BBRT



----- Original Message ----- 
From: "Dennis PLEAU" <ddpleau at msn.com>

I've been told GM picked a bolt size that wasn't readily available, so 
people didn't put the wrong bolt in there.  Probably not a place you want a 
grade 3 bolt.

Dennis



> From: robynwood at thelearningpark.com> To: VirtualVairs at corvair.org> 
> Subject: RE: <VV> Flywheel bolts> Date: Tue, 11 Dec 2007 22:25:25 -0800> 
> CC: > > Well the consensus is to dress any rough edges, flatten out a 
> socket end,> and reinstall. Sounds like a good plan, I will let you know 
> how it turns> out this upcoming weekend. BTW, did a lot of searching the 
> local> nut/bolt/fastener companies and all of them turned up as "not 
> carried", a> couple of them could make some for me (in 100 unit qty's), 
> and even the big> GM parts house here said they could order them in for 
> about $6 each. Just> seemed like a weird thing, that a bolt used on a '60 
> eras car could not be> found on the shelf.> > Guess I will be careful with 
> the next can of rusty bolts I come across.....> > > Thanks for the 
> assistance, >