<VV> car wont start after setting two days

[Ron]

The suction fuel line is probably leaking a little air so that at a low 
cranking speed there is a negligible amount of fuel being pumped.  The 
solution is to find and fix the air leak and not to go to an electric pump 
so that it can leak gasoline to wherever.
RonH

----- Original Message ----- 
From: "Frank Maloof" <corvette at velocity.net>
To: <virtualvairs at corvair.org>
Sent: Friday, December 21, 2007 6:09 PM
Subject: <VV> car wont start after setting two days


> my 65 corvair 110 , wont start if it sets two days , i have to prime the 
> carbs. with a little gas , then it starts right up , if i dont prime it , 
> all it will do is turn over till the Batt. goes dead, and will not start , 
> what do i do , Thanks, Frank From Near Erie pa  65 Monza Cp 110. PS i Have 
> it put up for ther winter but want to fix it befor driveing in the spring 
> .
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>