<VV> oil leak

[BBRT]

Yes, that  is a new viton seal. Install from the engine side of the 
bellhousing. Make sure crank flange is smooth where seal will fit, so it 
seals. Some load with grease, some oil, etc.

Chuck S
----- Original Message ----- 
From: "ron turner" <ron67ran at hotmail.com>
To: <virtualvairs at corvair.org>
Sent: Thursday, January 25, 2007 10:30 AM
Subject: <VV> oil leak


> ok--prior owner installed bellhousing seal from diff side so that might 
> have been reason for leak--new replacement seal he supplied from Clarks is 
> of different construction--removed seal is all metal with inner ring of 
> rubber---new seal has brown rubber coating on mounting surface and has 
> ridges--is this correct and do I tap it in till it seats to inner 
> bellhousing?
>