<VV> 140 heads

[BBRT]

No, I wouldn't replace the intake seats and furthermore, on the heads I have 
ruined .... er ...... raced, the exh seats came out. And if you do have to 
have them done or anyone, you need to know what and how  you want them done 
as often the local guy will do them cold, for one thing, and use larger od 
seats which causes problems..

Good Luck

Chuck S
BBRT
----- Original Message ----- 
From: <KELLYJRE at aol.com>
To: <virtualvairs at corvair.org>
Sent: Tuesday, January 30, 2007 7:45 PM
Subject: <VV> 140 heads


>I have a nice set of 140 heads. new valves, new springs. Deflashed cooling
> passages. head gasket surface is perfect ( never cut ) Question is, should 
> I
> go ahead and have the intake seats replaced ? I know they are famous for
> falling out, but what would you do. This is for a 100% stock 140 rebuild. 
> If I  do
> get the seats done, should a corvair specialist do it, or can the local
> machine be trusted.
>
> Ed Kelly
>
> corsa s.c.
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________