<VV> Engine transplant

Ian Harding harding.ian at gmail.com
Fri Jul 6 10:23:57 EDT 2007


According to the book it's 1 inch for the flywheel bolts and 3/4 inch
for the flex plate bolts, in case they get mixed up...

- Ian

On 7/5/07, Mike Shank <mike.shank at juno.com> wrote:
> Mike-
> Follow Mark's advice (below) and make absolutely certain that you have
> the correct (shorter) length bolts for the torque converter flex plate.
> Trust me, it is a "VERY BAD THING" to use the longer bolts that hold the
> flywheel to the crankshaft (from the 4-spd setup) - even if you may have
> just removed them from those same holes on the end of the crankshaft just
> a little while ago, DONT PUT THEM BACK IN!  I'd recommend bagging them
> and fastening the bag to the "discarded" flywheel as soon as you remove
> it.


More information about the VirtualVairs mailing list