<VV> TV adjustment

[Stephen Upham]

Trying to adjust the TV rod in order to get the PG to shift  
properly.  I checked the carbs for synchronization.  I then unhooked  
the return spring in order to be able to pull the TV rod past the  
detent on the PG and reattach.  Well, first, it's a good idea to  
remove the rubber boot from the fire wall.  I'll be reordering one of  
those today.  Then, as I pulled on the TV rod to get it past detent,  
it damn near came back to the alternator.  Well, THAT can't be good.   
No telling what the #$%@ I've done now.  At its current position,  
there is no way to adjust the connecting screw to the cross link  
arm.  I would have to  move the TV rod back at least 1 1/2 " to even  
connect it, much less move it back 5 turns.  I jacked up the car on  
the rear drivers side in order to check the connections to the  
tranny.  I could have swore that I pulled a connection loose.   
Everything is still connected, although I don't know what is going on  
in the tunnel to the gas pedal.  I suspect if there is a loose  
connection, that's where I'm going to find it.   Now what?

Stephen "sweating bullets" Upham