<VV> No Brake Lights

[Ed Dowds]

Matt-
The brake light wiring goes thru the directional signal switch. It sounds 
like the input to the directional switch from the brake light switch is not 
going thru the directional switch to the brake lights. You probably have to 
pull the steering wheel and check the contacts in the directional switch. 
They can be bent (carefully!) to reestablish the correct contact. You can 
put a meter on the white wire of the brake light switch to find which 
contact that feeds in the directional switch. If the switch is in the off 
position the white wire should connect to the green and yellow wires thru 
the directional switch. You can check for continuity at the steering colunm 
connector.
>Matt wrote:
Reinstall the bulbs, and I'm BACK TO NO BRAKE LIGHTS (but  turn signals that
use the same wire and same bulb element work  fine.)
HUH?<

_________________________________________________________________
Local listings, incredible imagery, and driving directions - all in one 
place! http://maps.live.com/?wip=69&FORM=MGAC01