<VV> Power Top control on the "Cheap/ Easy"
Ron
ronh at owt.com
Fri Jun 8 16:50:14 EDT 2007
No, use a Bosch relay. They are available.
RonH
----- Original Message -----
From: "Matt Nall" <nalllm at verizon.net>
To: <virtualvairs at corvair.org>
Sent: Friday, June 08, 2007 1:24 PM
Subject: Re: <VV> Power Top control on the "Cheap/ Easy"
> We could with a high enough rated switch....but Terry understands....that
> a couple of $2 Chinese 30 amp realys would be used.....at least I think
> so!!! gg
>
> I should've explained further...
>
> The "reason" for the Double pole ...so you have a "spare" already
> mounted..should it fail!! Think about it!! ggg
>
> Matt Nall
> All Vairs!
> http://members.aol.com/patiomatt
> Lots of Corvair Technical info!
>
> ----- Previous Message -----
> From: "Jim Bannister" <jimster1 at earthlink.net>
>
>> Aren't we picking the relay with the switch and not powering the motor
>> via
>> the switch? Remember the motor gets 12V. thru the breaker all the time.
>> It
>> runs when it gets a ground.
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help,
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>
More information about the VirtualVairs
mailing list