<VV> Wire Routing in an Early

[Matt Nall]

Tap into a good 12 volt supply at the Horn relay.


Matt Nall
All Vairs!
http://members.aol.com/patiomatt
Lots of Corvair Technical info!
----- Original Message ----- 
From: "Ron" <ronh at owt.com>
To: <virtualvairs at corvair.org>
Sent: Friday, June 15, 2007 11:36 AM
Subject: <VV> Wire Routing in an Early


Some weeks ago I inquired about a problem with the headlight switch breaker 
going off when the halogen headlights were on high beam.  About five list 
members responded  (Thank you all!) with the suggestion that the best 
solution would be to run a separate high amp wire just for the headlights. 
Since I already have wire and Bosch relays, I'll do that, so the question of 
the moment to those who've already done it is:  What is the best routing for 
this wire in an early (wagon)?  And, where/how did you run it into the 
trunk?  Hopefully I can minimize my mistakes with this knowledge.