<VV> Orientation of the top engine vent/baffle plate that sitsbelow the top engine cover

[Andy Clark]

It only fits one way. The bolt holes are offset to make this so.

Andy Clark
Camano Island, WA.
1966 140/4 Monza Sedan
1966 140/4 Yenko Clone
1966 180/4 Cord 8/10 #60
----- Original Message ----- 
From: "Jack Kean" <keanproducts at sbcglobal.net>
To: <virtualvairs at corvair.org>
Sent: Thursday, March 22, 2007 3:31 PM
Subject: <VV> Orientation of the top engine vent/baffle plate that sitsbelow
the top engine cover


> I want to know which side of the engine that the top vent should face?
Drivers or Passenger side? This is not the actual top engine cover (with the
vent tube and blower bearing, that has the vent tube on the passenger side)
this is the vent/baffle plate that sits below that cover. Engine is a late
model.
>
> thanks
> jack kean