<VV> difference in turbos

[Harry Yarnell]

Thanks John; you probably have identifyed the turbine sitting on my beer 
cooler all these years, as a 180. It's exactly 2" across the exit end of the 
turbine.

harry yarnell
perryman garage and orphanage
hyarnell1 at earthlink.net
----- Original Message ----- 
From: <JVHRoberts at aol.com>
To: <dnaisaac at rogers.com>; <VirtualVairs at corvair.org>
Sent: Saturday, May 19, 2007 10:04 AM
Subject: Re: <VV> difference in turbos


>
> The 150 turbine wheel is smaller than the 180 turbine wheel, right where 
> the
> exhaust exits the turbine housing. I believe the 180 wheel is nearly 2" at
> that point, whereas the 150 is not much more than 1.5".
>
> In a message dated 5/19/2007 7:54:50 AM Eastern Daylight Time,
> dnaisaac at rogers.com writes:
>
> Can  anyone please tell me what is the difference between the 150 and 180
> turbo  exhaust turbine with shaft and impeller. Can I tell by looking at 
> the
> part?  if so what do I look for?
>
> Thanks for any information.
>
> Dorai  <><
>
>
>
>
>
>
> ************************************** See what's free at 
> http://www.aol.com.
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>