<VV> IECO manifols for LM 110

[Rodney Sampson]

Tony:

That's what I used, it puts the tubes around 3/4"  too long to fit on 
the head studs...

Rodney

Tony Underwood wrote:

> At 02:38 PM 5/28/2007, Rodney Sampson wrote:
>
>> All:
>>  Recently obtained an IECO 4bbl manifold for my LM 110 engine.
>>   It's the one where the tube bolt to the casting and the casting has 
>> passage for
>>      some circulating warm liquid.
>>   My issue is, when the manifold is bolted together it's about 1/4" 
>> too far between the bolt holes( i.e. I have to
>>       bend the carb studs out for tis to fit).
>>    Question, is this truly for the LM engine ?
>>    My head castings indicate that it's a 66.
>>
>
>
>
>
> You MUST use the std GM/Rochester carb spacers on the tubes where they 
> attach to the carb mount/plenum.   Otherwise, the intake won't fit.    
> The spacers are available from vendors.
>
>
> tony..