<VV> short circuit '69 lights technical

[Ken Campbell]

----- Original Message ----- 
From: "Frank DuVal" <corvairduval at cox.net>
Subject: Re: <VV> short circuit '69 lights technical


> I use a headlamp instead of the taillamp sized bulb for my tester. If it
> lights bright, you KNOW there is a short! Easy to see from all around
> the car also.
>
> Frank DuVal
>
> Jim Bannister wrote:
>
> >Mike, If I were you I'd make myself a little test light.  Take one of
your
> >blown fuses and solder a wire to each end.  About six feet of wire later,
> >connect a tail light bulb or similar to the wires.
***********
If you have too much time on your hands .... solder in about  6 count of 12
volt interior bulbs, in serial ...  ( string )...  a guy can never have
enough gadgets ....

... use a big solder iron tip  and some electronic grade solder paste to
make your life easy ...

ken campbell, all lit up in iowwer