<VV> New Clutch Isnt Working
allvair at allvair.com
allvair at allvair.com
Thu Nov 22 11:17:33 EST 2007
Tighten the adjustment up some more!!? If that doesn't do it... put the car against a curb... do a "burn-in"... this is common with many replacement clutches today.....? material is just slightly too thick!
Matt Nall
AllVairs!
Web= http://tinyurl.com/3ds7d
-----Original Message-----
From: Steve Brennan <Alohaz at ca.rr.com>
I just installed a new Kevlar clutch in my 1962 Spyder Coupe. All seemed to
go well with the installation of the clutch and putting the drivetrain back
in the car, at least until I started the engine and tried putting the car
in gear (while the car was still on stands). While I can get it into 1st,
2nd and 3rd gear, it does not feel smooth, as it was before installing the
new clutch. Worse yet, if I try to put it into 4th gear or reverse, it just
grinds, as if I was not stepping on the clutch at all. Double pumping, etc.
has no effect on this problem.
More information about the VirtualVairs
mailing list